What Will You Be Tested On During the Drive Test?

By George
Driving test

When can I start driving with a provisional license? To begin with, you must pass the driving exam, which is much simpler than it seems. If you are getting ready to take a driving test at a service center, you might be wondering what to expect from your road test. In this blog post, we'll give you a quick rundown of the essentials of what to plan for your license exam.

How does the Test work?

The driving test is a test that you need to take to get your driver's license.It is not just a test of how well you can drive, it also tests your knowledge of the rules and regulations of the road. You will be tested on many things during the driving test. 

25 zones make up the predetermined course for the driving test. The drive will be guided by a testing officer who will also be in the car with you, record your performance on a test score sheet, and direct the drive. Your ability to exhibit low-risk driving behaviour in a variety of circumstances will determine how well you perform on your test. The examination includes five important performance metrics:


  1.       Speed Management

You must maintain a legal and safe speed when driving, adjusting it to the flow of traffic, the weather, and the ground conditions. You need to:-

Maintain space to the front: To keep a safe distance from other vehicles in front of your own, you must alter your speed. Three seconds should be the very minimum safe distance in front. In bad weather or when another car is following you too closely, you must boost this.

Maintain space when stopped: Keep one to two car widths behind the car in front when you're stopped in traffic to lessen the chance of hitting it from behind. Once other cars have stopped behind you, and the chance of getting hit from behind has decreased, you may go ahead to within 1m.

Reduce speed: If you cannot see the road in front of you clearly, you must slow down. Blind corners, obstructed crossroads, crests, and adverse weather conditions are examples of situations when your visibility may be impaired. If you can't see five seconds ahead, slow down. You must also slow down in situations where space to the side of your vehicle is limited.

  1.       Road Positioning

Positioning is essential to safe driving since it gives you the best visibility and lets other road users know what you are about to do. You will be required to maintain a safe and legal driving posture throughout the test. This pertains to positioning at lines and stop signs as well as during manoeuvres like a 3-point turn and reverse parking. You must take care of:-

Buffering: Buffering is the practice of maintaining as much side space around your car as is practicable under the circumstances. You should be at least1 m apart from other vehicles and any hazards.

Turns at intersections: In order to maintain a steady and secure flow of traffic, your position when making turns is essential.

Manoeuvres: During the driving test, you will be required to perform a number of manoeuvres that will be chosen from the list below:

  • a kerb side stop
  • a hill start
  • a 3-point turn
  • parking, reverse parallel, 90 degree or 45 degree, front or rear to kerb

You will be graded on how well you place your car safely, legally, and correctly during the manoeuvres.


  1.       Decision Making

Whenever you enter traffic, change lanes, cross the street, or make a turn at an intersection, an important decision must be taken. You will be expected to show smooth, efficient decision-making throughout the exam. You end up failing if you ignore safe gaps or stop excessively at junctions when it is clearly safe to move forward.

  1.       Responding to Hazards

Your ability to recognise hazards is crucial for low-risk driving. You will be judged on how well you can identify hazards and respond appropriately during the test. You should consider whether the objects you see could possibly enter your accident -avoidance space as you scan the surrounding traffic. you should take the following actions to protect your crash avoidance space: 

  • "setting up" or covering the brakes
  • easing off the accelerator
  • reducing speed
  • creating a "buffer" from the hazard by changing your position on the road or changing lanes

You are more equipped to handle any potentially risky situations because of your capacity to react.

  1.       Vehicle Control

Some of these driving duties will be observed and recorded by the testing officer.

  • Proper vehicle control is made possible by steering geometry and seat posture.
  • When accelerating and decelerating, smoothly use the accelerator.
  • Use the brakes skillfully and efficiently.
  • Align the clutch and gear lever for seamless gear changes.
  • Pick the right gear for driving, stopping, and parking.
  •  Don't over-rev when shifting into or out of gear.
  • A seat belt that has been properly tightened, fitted, and adjusted (low, flat and firm).
  • Before starting the car, put the brakes on.
  • Avoid rolling back while beginning on hills.
  • Correct use of the park brake to secure the car and full release before starting the engine.
  • When steering, employ the "hand-over-hand" or "pull-push" techniques with both hands on the outside of the steering wheel.
  • Use additional controls, such as indicators, windscreen wipers, and demisters.

A driving test is a mandatory test to assess the ability of a person to drive safely without harming oneself or other resources. It gives a remark to the driver on how to improve or how to polish the skill without being in many hazards. So, for better driving lessons, you need to choose better-authorized driving schools and take your lessons with confidence and empowerment. Driving requires skill and you are the one with the skill…Happy driving!

Back to Top